Auto Service Equipment
Personnel Lifts
Trailers
Special technics
Cranes
Containers and bunds
Gift ideasCTM-250 ST Combination welding machine TIG + MIG/MAG + MMA/E-Hand + CUT/Plasma with 200 amp and 50 amp plasma function
The STAHLWERK CTM-250 ST is a combination welding machine that covers the TIG, MIG/MAG, MMA and MMA processes and has a 200-amp and a 50-amp plasma cutting function. One of the many advantages of this multifunctional device is that numerous welding and cutting parameters can be set individually. The device is suitable for processing thin sheet metal and for flux cored wire. CuSi3 soldering is only possible in TIG mode. When plasma cutting, the 4-in-1 combination device achieves a cutting capacity of up to 14 mm. The CTM-250 ST is also ideal for cutting stainless steel sheets and metals with rust film and paint. Despite its extensive functions, the CTM-250 ST is very compact and is powerful and reliable thanks to its advanced IGBT technology. The CTM-250 ST is supplied with a comprehensive accessory package.
Scope of delivery:
1 x Professional TIG welding torch WP-26F / hose package 3 meters
1 x TIG TIG accessory set 8 pieces
1 x Professional plasma hose package AG-60/SG-55 3 meters
1 x Plasma accessory set 3-piece (this is already pre-assembled on the plasma torch)
1 x water separator with pressure gauge and snap-on quick couplings
1 x connecting hose with snap-on quick-release couplings from the device to the water separator, incl. 6-piece connection set
1 x AK-15 professional MIG welding torch / 3 meter hose package with Euro central connection
1 x 3-piece MIG accessory set (this is already pre-assembled on the MIG/MAG torch): 1 x gas nozzle, 1 x contact tip 0.8 mm, 1 x gas nozzle holder
1 x earth cable 3 meters
1 x electrode holder 3 meters
1 x wire brush
1 x gas connection hose with quick coupling 5 meters
1 x contact tip M6 x 28 - ø 0.8 mm
1 x contact tip M6 x 28 - ø 1.0 mm
2 x wire guide rollers 0.8 mm & 1.0 mm with V profile (already installed in the device)
2 x wire guide roller 0.6 mm & 0.8 mm with V profile
1 x installation wrench
1 x Teflon tape
1 x protective cover
Parameters
| Protection degree (IP) | IP21S |
| Power supply | 1 x 230V AC (+-15%) |
| Air consumption | min. 100 L/min |
| Air pressure | max.4bar |
| Cutting capacity | 14mm |
| Cutting current | 15-50A |
| Sizes | 440x255x360mm |
| Welding current | 10-200A |
| Weight | 13kg |
