Auto Service Equipment
Personnel Lifts
Trailers
Special technics
Cranes
Containers and bunds
Gift ideasAdBlue dispensing nozzle with meter
The electronic oval gear flow meter is designed for precise control of AdBlue® (AUS32) filling and dispensing. The meter is equipped with a durable plastic housing, oval gears made of PPS and PTFE materials, and a plastic control nozzle with an automatic anti-drip tip.
The device is designed for use in AdBlue® transfer and dispensing systems where electronic recording of the filled liquid quantity is required. The flow meter provides a flow range of 1–20 l/min and a declared measurement accuracy of ±0,5%.
The flow meter housing is made of IXEF material with high-density glass-fibre filler, providing good mechanical strength. The gears of the internal measuring mechanism are made of PPS and PTFE, which are suitable for use with AdBlue®.
The flow meter has a 1/2" BSP (M) stainless steel swivel inlet connection, making hose positioning easier during operation. The outlet section is made of stainless steel and equipped with an automatic anti-drip tip, which helps prevent AdBlue® dripping after filling.
Important: this flow meter is not approved for use in fiscal transactions; therefore, its readings are not intended as fiscally verifiable measurements for commercial transactions.
Key advantages
- Electronic AdBlue® flow recording.
- Measurement accuracy of ±0,5%.
- Flow range of 1–20 l/min.
- Maximum working pressure of 25 bar.
- Durable IXEF glass-fibre-reinforced housing.
- PPS and PTFE oval gears for precise flow measurement.
- 1/2" BSP (M) stainless steel swivel inlet connection.
- Stainless steel outlet tube.
- Automatic anti-drip tip.
- Resettable and non-resettable total consumption counters up to 99 999 l.
- Operating temperature range of +5 to +50 °C.
- Operates with 3 × 1,5 V batteries.
- Suitable for AdBlue® dispensing and transfer systems.
Application
The flow meter is intended for AdBlue® (AUS32) transfer, filling and dispensing equipment. It is suitable for vehicle service workshops, vehicle fleets, agricultural machinery maintenance sites and other professional working environments where controlled AdBlue® filling and consumption recording are required.
Technical parameters
- Intended liquid: AdBlue® (AUS32)
- Connection: 1/2" BSP (M)
- Flow range: 1–20 l/min
- Max. working pressure: 25 bar (363 psi)
- Accuracy: ±0,5%
- Resettable total counter: up to 99 999 l
- Non-resettable total counter: up to 99 999 l
- Operating temperature: +5 to +50 °C
- Power supply: 3 × 1,5 V
- Housing material: IXEF with high-density glass-fibre filler
- Gear material: PPS and PTFE
- Inlet connection: stainless steel, swivel
- Outlet: stainless steel, Ø16 mm
- Tip: automatic anti-drip tip, stainless steel
- Control nozzle: plastic
- Weight: 1,2 kg
