Inverter power source with microprocessor control JOB 523P LAB 249600

Power source with 2 MIG torch 180A 3m.
Inverter technology power sources controlled by microprocessor for MIG/MAG with conventional and PULSED current, NO-GAS wire, MMA and TIG DC welding.
Wire welding with PULSED current essential for the welding of thin thicknesses, to avoid deformation and weld breaks.
MIG BRAZING program useful in bodywork for MIG brazing of galvanized sheets at low temperature, it avoids the sublimation of the zinc that protects the steel from corrosion.
Two MIG torches it allows to have two wire spools ready for welding two different materials; the typical choice in bodywork is to use SG2 and Cu.Si3 (or Cu.Al8) for repairs on carbon steel and galvanized sheet.
SPOOL-GUN torch optional, thanks to the 6m cable it allows to work at longer distances from the power source; the wire spool on the gun avoids any feeding problem, therefore it is a good option to weld with a soft wire like aluminium.
4 WELDING PROCESSES
1) synergic MIG / MAG specific welding programs for carbon steel, aluminium, stainless steel, copper-silicon and copper-aluminium wires.
2) manual MIG/MAG manual adjustment of welding parameters starting from a basic program.
3) MMA adjustment of welding current, ARC-FORCE and HOT-START.
4) TIG DC Lift Lift start to limit tungsten inclusions in the welded joint, manual adjustment of welding current, good for all metals, except aluminium.
Fine adjustment many welding parameters can be modified by the operator based on specific needs.
Welding programs it is possible to save a program with the optimal setting of the welding parameters suitable for a recurring application and recall it later.