Izplūdes gāzu sensora muciņa 1/2" 20 mm

This short series sensor socket is used for the removal and installation of Oxygen DPF sensors. It features a slot in the side, enabling it to be fitted over the wiring harness, and can be driven by either a 24mm spanner or 1/2"D ratchet making it ideal for both difficult access situations or for when increased torque is required to undo tight or seized sensors.

• Applications: 20mm exhaust gas sensors including DPF sensors on IVECO trucks.
• Single hex (6pt), 20mm (across flats). Length: 68mm.
• The combination of open wrench & 1/2” ratchet drive allows for the application of increased torque.
• Can be driven by 1/2"D ratchet or 24mm spanner depending on access. Manufactured from Chrome Molybdenum with black phosphate finish.

Pristatymas

• atsiimti mūsų biure ( HCT AUTOMOTIVE, Vienības gatve 181, Rīga LV-1058 )
• Venipak (pristatymas 3.00 €. Nemokamas pristatymas tik Rygos ribose perkant daugiau nei 100.00 €)
• Omniva (pristatymas 3.50 €. Nemokamas pristatymas tik Rygos ribose perkant daugiau nei 100.00 €)
• DPD (pristatymas 3.50 €. Nemokamas pristatymas tik Rygos ribose perkant daugiau nei 100.00 €)
• kurjeris

Mokėjimas

• grynaisiais pinigais
• banko pervedimas (gauti sąskaitą el. paštu)

Peržiūrėti gali tik registruoti klientai, kurie sėkmingai pirko. Prisijungti